Plumbing & Heating Tools

Monument 1470F Smoke Pellets Pack of 10

Smoke emitter pellets give off a dense white low-toxic smoke when ignited.

For testing flues, chimneys, fans etc.

Burn time 60 seconds.

Pack of 10.

Only £7.95

(£6.63 ex VAT)

Monument 1471I Smoke Matches

Smoke emitter matches give off a dense white low-toxic smoke when ignited.
For testing flues, chimneys, fans etc.

Burn time 20 seconds.

Quantity 12 per Box

Only £1.05

(£0.88 ex VAT)

Bailey 3745 Smoke Pellets - Small

Used for testing flues, chimneys and fans.

Gives off a white smoke when ignited.

Contents. 6.
Size. Small.

Only £10.35

(£8.63 ex VAT)

Monument 131W Socket Forming Tool 15mm

Socket forming tools for joining two pieces of copper pipe of equal diameter together without using fittings.

The loose former allows easier withdrawal of tool after use.

The resulting capillary joint can be soft or hard soldered.

Size. 15mm.

Only £10.90

(£9.08 ex VAT)

Monument 133C Socket Forming Tool 22mm

Socket forming tools for joining two pieces of copper pipe of equal diameter together without using fittings.

The loose former allows easier withdrawal of tool after use.

The resulting capillary joint can be soft or hard soldered.

Size. 22mm.

Only £11.20

(£9.33 ex VAT)

Monument 134F Socket Forming Tool 28mm

Socket forming tools for joining two pieces of copper pipe of equal diameter together without using fittings.

The loose former allows easier withdrawal of tool after use.

The resulting capillary joint can be soft or hard soldered.

28mm.

Only £23.15

(£19.29 ex VAT)

Scottool Combination Socket Forming Tool 15/22mm

Designed to form a socket on the end of a copper pipe into which another piece of copper pipe of the same size can be soldered.

Each tool accommodates two sizes of pipe saving on buying two seperate tools.

Sizes. 15 and 22mm.

Only £23.15

(£19.29 ex VAT)

Monument 68C Straight Shank Tank Cutter

Tank cutters enable circular holes to be cut in light gauge sheet metal, plastics and wood, and Tanks and Boilers..
The adjustable heat treated blade is easily moved and re-locked with a screwdriver.
Cutting speed must not exceed 40 r.p.m. otherwise blade burn out will occur.
Fitted with a straight hexagon shank with a capacity of 34mm - 125mm.
Cutter: Hardened steel

Only £16.40

(£13.67 ex VAT)

Monument 79K Tank Cutter

Designed for use with Carpenters Brace

Tank Cutters enable circular holes to be cut in sheet metal, plastics and wood and Tanks and Boilers.

The adjustable heat treated blade is easily moved and re-locked with a screwdriver.

Cutting speed must not exceed 40 r.p.m. otherwise blade burn out will occur.

Fitted with a brace type shank with a range of 19 - 125mm. (3/4in to 5in)

Only £17.85

(£14.88 ex VAT)

Priory 201/C Straight Shank Tank Cutter 4in

This Tank Cutter has a staight shank with a hardened carbon steel cutter blade and separate high speed steel pilot drill.
Suitable for use on most tank materials, steel, plastic, copper etc.

Suitable for use in hand held power tools.

Capacity 100mm Max.
Shank. Straight.
Cutter. Carbon Steel.

Only £12.60

(£10.50 ex VAT)

Priory 202B Bit Stock Tank Cutter 4.1/2in

This Tank Cutter has a bit shank suitable for use in a carpenters brace, a hardened carbon steel cutting blade and high speed steel pilot drill.
Suitable for use on most tank materials e.g. steel, plastic, copper etc.
Capacity is infinitely adjustable.

Capacity 1 1/4in - 4.1/2in (32-115mm).
Shank. Bit Stock.
Cutter. Carbon Steel.

Only £17.00

(£14.17 ex VAT)

Priory 400 Tank Cutter for Hand Brace/drill Stand

This Tank Cutter has a straight shank with 3 flats upon it to ensure a positive drive when used in 3 jaw chuck.
This Tank Cutter is suitable for use in a hand held brace or drill stand.
The cutting blade is manufactured from heat-treated high speed steel and the cutter has a high speed steel pilot drill and is suitable for use on most tank materials.

Capacity 1-5in (25 - 125mm).
Shank. Straight.
Cutter. H.S.S.

Only £31.95

(£26.63 ex VAT)