Thor Handtools

Thor 312AF Aluminium Face Size 2

Replacement cylindrical aluminium face (used as an alternative to copper).

Diameter: 38mm (1 1/2in).
Size: 2.

Thor A312 Aluminium Hammer Size 2

Malleable iron head fitted with two cylindrical ductile aluminium faces (designed to wear and be replaced) and a wooden handle.

Ideal for use where a heavy blow is required in a relatively small striking area. The malleable iron head and the aluminium faces combine to provide the weight for the blow while the faces prevent damage to most items being struck.

Used as an alternative to copper as a general-purpose soft-faced hammer in engineering applications for assembly, repair and maintenance operations.

Weight. 950g.
Diameter: 38mm (1 1/2in).

Size: 2.

Thor 1010 Dead-Blow Nylon Hammer 1lb

Coated die-cast aluminium alloy head with rubber grip and screw-in white nylon or brown polyurethane faces.

The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force.

For use as a multi purpose striking tool which is ideal for sustained and effective blows without recoil. Commonly used in most assembly/fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.

Replacement faces are available.

Diameter: 32mm (1 1/4in).
Weight: 525g (1lb).

Thor 1212 Dead-Blow Nylon Hammer 1.1/2lb.

Coated die-cast aluminium alloy head with rubber grip and screw-in white nylon or brown polyurethane faces.

The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force.

For use as a multi purpose striking tool which is ideal for sustained and effective blows without recoil. Commonly used in most assembly/fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.

Replacement faces are available.

Diameter: 38mm (1 1/2in).
Weight: 750g (1 1/2lb).

Thor 1414 Dead-Blow Nylon Hammer 2.lb.

Coated die-cast aluminium alloy head with rubber grip and screw-in white nylon or brown polyurethane faces.

The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force.

For use as a multi purpose striking tool which is ideal for sustained and effective blows without recoil. Commonly used in most assembly/fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.

Replacement faces are available.

Diameter: 44mm (1 3/4in).
Weight: 950g (2lb).

Thor 1616 Dead-Blow Nylon Hammer 2.3/4lb

Coated die-cast aluminium alloy head with rubber grip and screw-in white nylon or brown polyurethane faces.

The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force.

For use as a multi purpose striking tool which is ideal for sustained and effective blows without recoil. Commonly used in most assembly/fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.

Replacement faces are available.

Diameter: 50mm (2in).
Weight: 1250g (2 3/4lb).

Thor 2020 Dead-Blow Nylon Hammer 4.1/4lb

Coated die-cast aluminium alloy head with rubber grip and screw-in white nylon or brown polyurethane faces.

The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force.

For use as a multi purpose striking tool which is ideal for sustained and effective blows without recoil. Commonly used in most assembly/fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.

Replacement faces are available.

Diameter: 63mm (2 1/2in).
Weight: 2000g (4 1/4lb).

Thor 952W White Rubber Mallet 2.1/8in

Single-piece rubber head with a self-locking handle.

For general industrial use, these semi-hard rubber mallets give a gentle but firm blow with little rebound.

Black : Ideal for use under damp conditions or outdoors.

White : Will not discolour or leave marks on work surfaces.

Used as a general-purpose mallet in automotive, industrial, brewery, DIY and camping applications.

Weight: 300g (10oz).
Size: 2 1/8in.

Thor 954W White Rubber Mallet 3 In

Single-piece rubber head with a self-locking handle.

For general industrial use, these semi-hard rubber mallets give a gentle but firm blow with little rebound.

Black : Ideal for use under damp conditions or outdoors.

White : Will not discolour or leave marks on work surfaces.

Used as a general-purpose mallet in automotive, industrial, brewery, DIY and camping applications.

Weight: 725g (1 3/4lb).
Diameter: 3in.

Thor 957W White Rubber Mallet 3.1/2in

Single-piece rubber head with a self-locking handle.

For general industrial use, these semi-hard rubber mallets give a gentle but firm blow with little rebound.

Black : Ideal for use under damp conditions or outdoors.

White : Will not discolour or leave marks on work surfaces.

Used as a general-purpose mallet in automotive, industrial, brewery, DIY and camping applications.

Weight: 1125g (2 1/2lb).
Diameter: 3 1/2in.

Thor 8050 Cylindrical Hardwood Mallet 2in.

Laminated compressed wood heads (to a density of 1.3) fitted with flushed-in glass fibre hoops for extra security. With a conical self-locking handle.

Excellent resistance to impact and long service life. Suitable for hot work applications.
Typical uses include steel plate trade, casting, schools and technical colleges, general assembly, aluminium forming, aviation etc.

Weight: 300g (11oz).

Diameter: 50mm (2in).

Thor 8060 Cylindrical Hardwood Mallet 2.1/4in

Laminated compressed wood heads (to a density of 1.3) fitted with flushed-in glass fibre hoops for extra security. With a conical self-locking handle.

Excellent resistance to impact and long service life. Suitable for hot work applications.
Typical uses include steel plate trade, casting, schools and technical colleges, general assembly, aluminium forming, aviation etc.

Weight: 525g (1 1/4lb).
Diameter: 58mm (2 1/4in).

Thor 8070 Cylindrical Hardwood Mallet 2.3/4in

Laminated compressed wood heads (to a density of 1.3) fitted with flushed-in glass fibre hoops for extra security. With a conical self-locking handle.

Excellent resistance to impact and long service life. Suitable for hot work applications.
Typical uses include steel plate trade, casting, schools and technical colleges, general assembly, aluminium forming, aviation etc.

Weight: 750g (1 3/4lb).
Diameter: 67mm (2 3/4in).

Thor 8112 Super Plastic Mallet

Fitted with an ultra high molecular weight polythene head (which will not fracture, splinter or delaminate) and a wooden handle. 

Offers a high impact durability and high abrasive resistance. Resistant to corrosion and most chemicals.

For use in the jewellery industry, steel rule die assembly, the furniture industry and sheet metal working.

Weight: 180g
Diameter: 38mm.

Thor 8116 Super Plastic Mallet

Fitted with an ultra high molecular weight polythene head (which will not fracture, splinter or delaminate) and a wooden handle. 

Offers a high impact durability and high abrasive resistance. Resistant to corrosion and most chemicals.

For use in the jewellery industry, steel rule die assembly, the furniture industry and sheet metal working.

Weight: 325g.
Diameter: 50mm.

Thor 8122 Super Plastic Mallet

Fitted with an ultra high molecular weight polythene head (which will not fracture, splinter or delaminate) and a wooden handle. 

Offers a high impact durability and high abrasive resistance. Resistant to corrosion and most chemicals.

For use in the jewellery industry, steel rule die assembly, the furniture industry and sheet metal working.

Weight: 650g.
Diameter: 70mm.

Thor 108 Rawhide Mallet Size 0

Cylindrical compressed rawhide head provides a large striking surface with a relatively light head weight.

Used in sheet metal forming, the jewellery industry and assembling steel rule dies in cutter plattens.

Fitted with an oval wooden handle.

Size: 0.

Weight: 60g (2oz).
Diameter: 25mm (1in).

Thor 110 Rawhide Mallet Size 1

Cylindrical compressed rawhide head provides a large striking surface with a relatively light head weight.

Used in sheet metal forming, the jewellery industry and assembling steel rule dies in cutter plattens.

Fitted with an oval wooden handle.

Size: 1.

Weight: 116g (4oz).
Diameter: 32mm (1 1/4in).

Thor 112 Rawhide Mallet Size 2

Cylindrical compressed rawhide head provides a large striking surface with a relatively light head weight.

Used in sheet metal forming, the jewellery industry and assembling steel rule dies in cutter plattens.

Fitted with an oval wooden handle.

Size: 2.

Weight: 170g (6oz).
Diameter: 38mm (1 1/2in).

Thor 114 Rawhide Mallet Size 3

Cylindrical compressed rawhide head provides a large striking surface with a relatively light head weight.

Used in sheet metal forming, the jewellery industry and assembling steel rule dies in cutter plattens.

Fitted with an oval wooden handle.

Sizze: 3.

Weight: 225g (8oz).
Diameter: 44mm (1 3/4in).