Call us on 0844 804 4190Nailers, Staplers, Nails and Staples, Safety Footwear, Safety Equipment & Workwear
Drain testing U Air Gauge suitable for use in testing drains and sewers.
Size. 4in. - 100
Inflatable rubber bladder with canvas protective case which can be used for blocking off pipes during maintenance and similar applications.
Max PSI 10
Max Bar 0.68
Size. 4in. - 100mm maximum diameter
Supplied with 1/4in brass tap & 6ft of tubing.
Size. 6in. - 150mm maximum diameter
Size. 9in. - 225mm maximum diameter
This drain test kit is an off the shelf solution for the completion of air tests to 4in (100mm) water gauge pressure on drains and pipes..
Consists of the following:-
4in U - Gauge, 9 Feet Length of tubing,Hand Bellows, Y piece 1/2in 1in Test Nipple Cap.
The brass test nipple cap is fitted to a drain test plug for the completion of air tests.
Size : 1/2in.
Size : 1in.
Centre locking drain test plugs with plastic blanking cap, suitable for air or water testing of drains and sewers.
Size 3in/75mm.
Size 4in/100mm.
Size 6in/150mm.
Brass centre locking drain test plug, with brass blanking cap, suitable for air or water testing of drains and sewers.
Size 8in/200mm.
Size 9in/225mm.
Size 10in/250mm.
Size 12in/300mm.
Size. 15in/375mm.
Size 18in/450mm
The U gauge tube has to be connected to the nipple via Y piece, U-gauge and hand bellows for the completion of air tests.
Length. 1metre.
For drain testing by pumping air into a sealed pipe and U gauge.
Pressure will return to zero quickly if there is a leak in the section.
Brass inflator pump to suit 1/4in brass tap.
Used for inflating canvas air bags.