Monument Plumbing Tools

Monument 3026U Waste Pipe De-burrer 1.1/4in

This pipe de-burrer is ideal for cleaning and de-burring plastic waste pipe and is also suitable for push-fit plastic pipe.

Size: 1 1/4in

Monument 3027X Waste Pipe De-burrer 1.1/2in

This pipe de-burrer is ideal for cleaning and de-burring plastic waste pipe and is also suitable for push-fit plastic pipe.

Size: 1 1/2in

Monument 82u Tank Connector Fitting Tool 15mm

This tool has been designed to make the job of fitting a 15mm Tank Connector easy. Traditionally the task of fitting a connector to a domestic cold water tank has been awkward and required 2 pairs of hands or very long arms. The tool engages with the dog drive of the tank connector and can then be used one handed whilst the nut of the tank connector is tightened.

Size 15mm

Monument 2922M Copperkey Pipe Cleaning Tool 22mm

The very best and safest way to prepare copper pipe and copper fittings. Long lasting double stemmed brushes clean quickly. Quick thorough tubing prep with patented tungsten carbide abrasive technology. Works 3 times faster and lasts 4 times longer than conventional tools.

Patented ratchet handle makes jobs possible in all tight spaces. Eliminates the risk of scrapes or flux burns.

Size 22mm

Monument 2036t Olive Puller 15/22mm

Ideal when removing 15mm or 22mm olives from copper piping without damaging the attached pipe.

This puller simply utilises the compression fitting locking nut to remove the olive from the tube, instead of cutting the compressed olive.

With all the major parts of the tool turned from brass this olive puller provides a quick and reliable remedy to removing most 15 and 22mm olives.

Monument 175C U Gauge Or Manometer

U. gauge or Manometer.

After installation or repairing of any drain or pipeline system it should be tested for leaks using this gauge.
Made from unbreakable parts it will test up to 4in/100mm water gauge pressure irrespective of pipe diameter.
The hinged lid of the gauge folds back so that it forms a base behind the gauge for added stability.

Monument 1474R Universal Flex Plug 3.1/2in - 6in

A universal flexible plug, inflated via a schrader valve hose.

For use with monument 174 Drain Testing Kit.

Size. 3.1/2in - 6in (89mm - 150mm).

Max PSI 12

Max Bar 0.86

Monument 1377W Drain Testing Plug 3in

Used for blocking off drain pipes.

Fitted with removable top caps and rubber rings.

They are capable of sealing against pressures of up to 100PSI - 7 Bar.

Diameter.75mm - 3in

Monument 1378Z Drain Testing Plug 4in

Used for blocking off drain pipes.

Fitted with removable top caps and rubber rings.

They are capable of sealing against pressures of up to 100PSI - 7 Bar.

Diameter.100mm - 4in.

Monument 1379C Drain Testing Plug 6in

Used for blocking off drain pipes.

Fitted with removable top caps and rubber rings.

They are capable of sealing against pressures of up to 100PSI - 7 Bar.

Diameter.150mm - 6in.

Monument 257C Gas Test Gauge 30mb 300mm/12in

Made from tough plastics used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances.

Extruded cover slides off and may be clipped over the base for standing the tool vertically during use.

Hanging tab permits vertical hanging from suitable protrusions.

Marked in millibars.

Millibar scale adjusts for zeroing water level.

Size. 300mm/12in.

Capacity: 30Millibar

Monument 258F Gas Test Gauge 60mb 600mm/24in

Made from tough plastics used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances.

Extruded cover slides off and may be clipped over the base for standing the tool vertically during use.

Hanging tab permits vertical hanging from suitable protrusions.

Marked in millibars.

Millibar scale adjusts for zeroing water level.

Size. 600mm/24in.

Capacity: 60Millibar

Monument 259I Gas Test Gauge 90mb 900mm/36in

Made from tough plastics used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances.

Extruded cover slides off and may be clipped over the base for standing the tool vertically during use.

Hanging tab permits vertical hanging from suitable protrusions.

Marked in millibars.

Millibar scale adjusts for zeroing water level.

Size. 900mm/36in.

Capacity: 90Millibar

Fitted with hose for testing LPG (Low pressure gas)

Monument 1445F Black Rubber Hose - 1 Metre

Spare Hose for connecting testing equipment.

1 metre. 3/8 in dia

Monument 1277S Hose for Gas Testing - 1 Metre

Replacement Hose to fit Gas Test Gauges.

1metre. Coil.

Note: Do not use this hose for LPG (low pressure gas)

Monument 1452B Hydrojet Pump

The hydro-jet pump safely provides the exploring power of a water jet to unblock sinks, baths, showers, toilets and drains. First you fill the unit with water then held the unit over the waste and punp down (or hit) the handle to create a powerful water jet. To clean, just flush with clean water.

Monument 1292N Air Bag Stopper

Air Bag Stopper.
Nylon outer casing fitted with Schrader Valve.
Used in conjunction with pump 1308Q

Diameter 100mm.

Inflation Max PSI 2

Inflation Max Bar 1.7

Monument 179 Hand Bellows

Air may be carefully pumped into the pipe system using these bellows.
Fitted with a positive, hand operated non-return valve.
Designed for use with Monument Air testing U gauge kit.

Monument 180S Nipple Cap 1/2 Bsp

Made from brass with a leather washer for attachment to drain test plug outlets to enable connection of rubber hose to the U gauge.
Size is 1/2in BSP.

Monument 183B Tee Piece for U Gauge

Connects three pieces of rubber hose together for convenient connection to U gauge, bellows and nipple cap.