Monument Plumbing Tools

Monument 501X Spare Tap Reseater Cutter 5/8in

Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.

Size. 5/8in (16mm).

Only £2.80

(£2.33 ex VAT)

Monument 502A Spare Tap Reseater Cutter 11/16in

Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.

Size. 11/16in (17mm).

Only £2.85

(£2.38 ex VAT)

Monument 503D Spare Tap Reseater Cutter 3/4in

Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.

Size. 3/4in (19mm).

Only £2.90

(£2.42 ex VAT)

Monument 505J Spare Tap Reseater Cutter 7/8in

Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.

Size. 7/8in (22mm).

Only £3.25

(£2.71 ex VAT)

Monument 507P Spare Tap Reseater Cutter 1.in

Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.

Size. 1in. (25mm).

Only £3.50

(£2.92 ex VAT)

Monument "450P D.I.Y. Tap Reseating Tool 17,19 & 25mm"

Re-cuts the seats of leaking tapes.

Fits BS5412 & BS1010 1/2in and 3/4in taps.

Complete with :-
17, 19 25mm (11/16in 3/4in 1in) Flat Cutters and two double ended plastic bushes.

Only £10.35

(£8.63 ex VAT)

Monument 454B Tap Reseating Tool 1/2in & 3/4in BS5412

Re cuts the seats of worn taps or stopcocks without disconnection from the pipework.
Tapered cones screw into the top of tap body, provided tap body is threaded to the top.
For taps with recessed threads in body use parallel bush series.
Cutters are case hardened, feedscrew allows fine adjustment to the cutter.
All parts are interchangeable.

Fits 1/2in & 3/4in BS5412 bevelled seats.

Complete with 17, 20mm (11/16in 13/16in Bevelled Cutters.

One double bush..

Only £21.75

(£18.13 ex VAT)

Monument 455E Tap Reseating Tool 1/2in & 3/4in BS5412 BS1010

Re cuts the seats of worn taps or stopcocks without disconnection from the pipework.
Tapered cones screw into the top of tap body, provided tap body is threaded to the top.
For taps with recessed threads in body use parallel bush series.
Cutters are case hardened, feedscrew allows fine adjustment to the cutter.
All parts are interchangeable.

Fits 1/2in & 3/4in BS1010 New series and BS5412 Flat & Bevelled seats.

Complete with 17, 19, 20, 25mm (11/16in 3/4in 13/16in 1in) flat cutters and 11/16in, 13/16in (17,20mm) Bevelled Cutters.

Two double bushes.

Only £41.50

(£34.58 ex VAT)

Monument 458N Tap Reseating Tool 11/16in & 3/4in BS1010

Re cuts the seats of worn taps or stopcocks without disconnection from the pipework.
Tapered cones screw into the top of tap body, provided tap body is threaded to the top.
For taps with recessed threads in body use parallel bush series.
Cutters are case hardened, feedscrew allows fine adjustment to the cutter.
All parts are interchangeable.

Fits old series 1/2in BS1010 flat seats.

Complete with 17, 19mm (11/16in 3/4in ) Flat cutters.

One tapered cone.

Only £18.10

(£15.08 ex VAT)

Monument "460U Tap Reseating Tool 11/16in,3/4in,13/16in,1in BS1010"

Re cuts the seats of worn taps or stopcocks without disconnection from the pipework.
Tapered cones screw into the top of tap body, provided tap body is threaded to the top.
For taps with recessed threads in body use parallel bush series.
Cutters are case hardened, feedscrew allows fine adjustment to the cutter.
All parts are interchangeable.

Fits old series 1/2in & 3/4in BS1010 flat seats.

Complete with 17,19, 20, 25mm (11/16in 3/4in 13/16in 1in).
Flat cutters and two tapered cones.

Only £32.50

(£27.08 ex VAT)

Monument 602E Turnpin 1.1/2in

For flaring lead pipe prior to jointing two pipes of equal diameter.

Size. 1.1/2in.- 38mm

Made from solid polypropylene.

Only £3.85

(£3.21 ex VAT)

Monument 604K Turnpin 2.in

For flaring lead pipe prior to jointing two pipes of equal diameter.

Size. 2in. - 50mm

Only £6.50

(£5.42 ex VAT)

Monument 1510F Mains Water Pressure Gauge

Mains water pressure gauge with 3/4in BSP thread fitting to taps.
Maximum to 11 bar.

Only £14.30

(£11.92 ex VAT)

Monument 3020C De Burring Tool

Disposable de-burring tool.

The swivelling blade rotates freely to allow all sorts of de-burring operations to be carried out inside tubes, on sheet materials, inside holes etc.

Suitable for use on steel, copper, brass, plastics, wood and castings.

Only £3.60

(£3.00 ex VAT)

Monument 1848E 6tpi One Piece Holesaw 22mm

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces, eliminating the need for pre-punching.

For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood.

Generally no cutting fluids are required, But for Cast Iron use Parafin
and for Stainless Steel use a cutting compound.

Working Speeds.
Mild Steel = 390Rpm
Cast Iron = 260Rpm
Stainless Steel = 195Rpm

11.5mm Shank

Depth of cut: 32mm

Diameter: 22mm

Only £6.30

(£5.25 ex VAT)

Monument 1849H 6tpi One Piece Holesaw 28mm

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces, eliminating the need for pre-punching.

For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood.

Generally no cutting fluids are required, But for Cast Iron use Parafin
and for Stainless Steel use a cutting compound.

Working Speeds.
Mild Steel = 390Rpm
Cast Iron = 260Rpm
Stainless Steel = 195Rpm

11.5mm Shank

Depth of cut: 32mm

Diameter: 28mm

Only £7.25

(£6.04 ex VAT)

Monument 1850L 6tpi One Piece Holesaw 35mm

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces, eliminating the need for pre-punching.

For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood.

Generally no cutting fluids are required, But for Cast Iron use Parafin
and for Stainless Steel use a cutting compound.

Working Speeds.
Mild Steel = 390Rpm
Cast Iron = 260Rpm
Stainless Steel = 195Rpm

11.5mm Shank

Depth of cut: 32mm

Diameter: 35mm

Only £8.40

(£7.00 ex VAT)

Monument 1851O 6tpi One Piece Holesaw 45mm

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces, eliminating the need for pre-punching.

For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood.

Generally no cutting fluids are required, But for Cast Iron use Parafin
and for Stainless Steel use a cutting compound.

Working Speeds.
Mild Steel = 390Rpm
Cast Iron = 260Rpm
Stainless Steel = 195Rpm

11.5mm Shank

Depth of cut: 32mm

Diameter: 45mm

Only £9.55

(£7.96 ex VAT)

Monument 1852R 6tpi One Piece Holesaw 50mm

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces, eliminating the need for pre-punching.

For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood.

Generally no cutting fluids are required, But for Cast Iron use Parafin
and for Stainless Steel use a cutting compound.

Working Speeds.
Mild Steel = 390Rpm
Cast Iron = 260Rpm
Stainless Steel = 195Rpm

11.5mm Shank

Depth of cut: 32mm

Diameter: 50mm

Only £10.60

(£8.83 ex VAT)

Monument 1853U 6tpi One Piece Holesaw 64mm

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces, eliminating the need for pre-punching.

For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood.

Generally no cutting fluids are required, But for Cast Iron use Parafin
and for Stainless Steel use a cutting compound.

Working Speeds.
Mild Steel = 390Rpm
Cast Iron = 260Rpm
Stainless Steel = 195Rpm

11.5mm Shank

Depth of cut: 32mm

Diameter: 64mm

Only £12.70

(£10.58 ex VAT)