Monument Plumbing Tools

Monument 325L Pop Up Waste Installation Tool

Zinc plated pop up waste tool.
For the difficult task of holding a pop up waste in position when installing into sinks, baths,basins or bidets.
The two spring steel blades fit into the circumferential slots in the waste which can be turned against the waste locknut.

Only £10.65

(£8.88 ex VAT)

Monument 350L Spare Jaw - Small

Spare jaws to fit all Monument adjustable basin wrenches.

Small.

Jaw capacity: 1 1/8in - 28.5mm

Available in three sizes.

Only £6.50

(£5.42 ex VAT)

Monument 3510 Spare Jaw - Medium

Spare jaws to fit all monument adjustable wrenches.

Medium.

Jaw capacity: 1 1/2in - 38mm

Available in three sizes.

Only £7.35

(£6.13 ex VAT)

Monument 352R Spare Jaw - Large

Spare jaws to fit all monument adjustable wrenches.

Large.

Jaw capacity: 2in - 50mm

Available in three sizes.

Only £20.70

(£17.25 ex VAT)

Monument 1010L Manhole Keys Pack 2

Manufactured from a single piece of malleable iron with a tee handle D shaped end.
Designed to make the removal of Manhole covers an easier operation.
Made with a 4in/100mm handle and a 5in/125mm shaft.
Sold in pairs.

Only £10.65

(£8.88 ex VAT)

Monument 2065F Radiator Valve Spanner

Spanner to facilitate fitting and removal of standard and thermostatic radiator valves.

Only £8.05

(£6.71 ex VAT)

Monument 324H mono Bloc Back Nut Spanner

Box spanner set including tommy bar for the fitting and removal of mono taps.

Only £6.05

(£5.04 ex VAT)

Monument 360Q Flat Steel Immersion Spanner

The flat style immersion spanner is made from zinc plated, pressed steel. A one piece casting allows really tight immersion heaters to be loosened by striking the handle.

Size 3 3/8in AF - 86mm

Only £4.85

(£4.04 ex VAT)

Monument 323F Box & 324h Mono Tap Spanners

Monument 323F box and 324H mono tap spanners.

323F is for tap back nuts, and the 324H is a mono block back nut box spanner.

Sizes covered:- 9,11,12 and 13mm.

Only £13.40

(£11.17 ex VAT)

Monument 345V Basin Wrench & 2059m Radiator Key Twin Pack

Adjustable basin wrench for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.
The teeth on the jaws will grip uneven shapes etc.
The swivelling head allows access where fixed spanners will not operate.
Solid steel handle has profiled end to allow attachment of socket and extension for longer reach.
Correct heat treatment of all components assures long life.

Supplied with small and medium jaws.

1/2IN & 3/4IN - 15 & 22mm

Plus

A multi purpose four way key for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, central heating pump cocks, some radiator valves and drain off valves

Only £27.95

(£23.29 ex VAT)

Monument 830V 15mm Copper Bending Spring

Square section spring steel for internal bending of copper pipes.
Polished finish.
15mm and 22mm are available with special hanging device to allow easy display on a pegboard.

Size. 15mm.

Only £3.35

(£2.79 ex VAT)

Monument 832B 22mm Copper Bending Spring

Square section spring steel for internal bending of copper pipes.
Polished finish.
15mm and 22mm are available with special hanging device to allow easy display on a pegboard.

22mm.

Only £4.40

(£3.67 ex VAT)

Monument Mini Bender 2611S

Mini bender for 180?? bends on 6mm , 8mm and 10mm copper pipe. Outside Diameter.

Only £20.05

(£16.71 ex VAT)

Monument 300M Automatic Pipe Cutter 8-22mm Capacity

This pipe cutter enables 8-22mm diameter copper and thicker walled plastic pipes such as those used in Central heating to be cut automatically once it has been sized and tightened.

Thin walled plastic pipes may collapse too easily unless an internal support is given to pipes. After tightening no further adjustment or feeding of the wheel into the tube is required.

Soft copper can also be cut without crushing if the tool is used like a conventional Cutter by feeding the wheel into the tube.
Ideal for use in confined spaces.

8-22mm. Capacity

Only £13.05

(£10.88 ex VAT)

Monument Automatic Copper Pipe Cutter 15mm 15PC

These automatic pipe cutter are ideal for cutting copper pipe, particularly useful when space is limited.

Easy to use.

Cuts in two directions.

Ideal for cutting 15mm outside diameter copper pipe.

To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt.

Size. 15mm.

Ratchet handle available Illustrated.(Code:- MON15R.)

Only £10.50

(£8.75 ex VAT)

Monument Automatic Copper Pipe Cutter 22mm 22PC

These automatic pipe cutter are ideal for cutting copper pipe, particularly useful when space is limited.

Easy to use.

Cuts in two directions.

Ideal for cutting 22mm outside diameter copper pipe.

To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt.

Size 22mm.

Only £11.40

(£9.50 ex VAT)

Monument 269N Spare Wheel for Autocut pipe cutter

Monument pipe cutter wheels are made from high quality, heat treated steels.

Suitable for both 268 and 289 pipe slices 15mm and 22mm copper tube and MON 240C & MON 303 21mm and 28mm.

Pack colour. Red.

Packs are colour coded according to use.

Only £2.00

(£1.67 ex VAT)

Monument 273A Spare Wheel for Tube Cutter

Monument pipe cutter wheels are made from high quality, heat treated steels.

General purpose for copper, brass and aluminium tube.

Qty: 1

Only £1.90

(£1.58 ex VAT)

Monument 284I Spare Wheel for Stainless Steel Tube

Monument pipe cutter wheels are made from high quality, heat treated steels.

To fit MON 265 & MON 266 Pipe cutters

Qty: 1

Only £2.90

(£2.42 ex VAT)

Monument Pipe Cutter No 0 264Y

High quality tool for use by professional and DIY Plumbing Installers, heating engineers, and maintenance staff.
Each tool assures a square even cut.
All parts liable to wear are heat treated.

For Copper, Brass, Aluminium & Polythene

NO.0. - Capacity 4 to 22mm ( For copper tube)

Only £13.20

(£11.00 ex VAT)